Bohler S500 for Shaper Cutters and Hobs
2022-08-19 14:14:00
jiangxingTools
2581
Bohler S500 for Shaper Cutters and Hobs
Material composition of S500: C-1.10, Si-0.50, Mn-0.20, Cr-3.90, Mo-9.20, V-1.00, W-1.40, Co-7.80
Standard: 1.3247, HS2-9-1-8, EN ISO 4957
Performance feature of Shaper Cutters and Hobs with S500:
Toughness & Ductility: good
Wear Resistance: high
Compressive strength: high
Edge Stability: high
Grindability: good
Hot Hardness (red hardness): very high
相關(guān)文章
-
Timing Pulley Hob for (AT.)D.T AT5
Timing Pulley Hob for (AT.)D.T AT5timing belt profile: (A.T)D.Tbelt type: AT5common range: 10-14T, 1... - Profile for Hobs
- RS120 Roller Chain Sprocket Hob with Pitch 38.1 x Roller Dia. 22.23
- PA20° Profile DIN3972 Standard Pre-grinding Gear Cutting Hob with Module m2.75
- PA20° DP3.5 Standard Gear Hob Cutter with BPⅡ
- PA20° Profile DIN3972 Standard Gear Hobber Cutter with Module m8
- Shank-type gear shaper cutter with DIN 3972/II
