Bohler S705 for Gear Hobs and Cutters
2022-08-19 13:58:18
jiangxingTools
2593
Bohler S705 for Gear Hobs and Cutters
Material composition of S705: C-0.92, Cr-4.10, Mo-5, V-1.9, W-6.20, Co-4.80
Standard: 1.3243, HS6-5-2-5, EN ISO 4957
Performance feature of Gear Hobs and Cutters with S705:
Toughness & Ductility: good
Wear Resistance: high
Compressive strength: high
Edge Stability: high
Grindability: good
Hot Hardness (red hardness): very high
相關(guān)文章
-
STD Pre-grinding Gear Hob Cutter with Tooth Profile DIN3972-Ⅲ
STD Pre-grinding Gear Hob Cutter with Tooth Profile DIN3972-Ⅲgear hob for maching prior to grinding... - M42, M35, M2 Timing Pulley Hobs with TiN, AP Coating
- ?PA20° PCD 75mm Disk Type Gear Shaper Cutter with Module m1~m4
- Gear hobs for synchroflex timing belt pulleys
- PA20° Module m3.25 Standard Involute Gear Hobbing
- GB Standard Gear Hobs with M1-M10
- Hobs for parallel side splines
