Sprocket Milling Cutter
2022-06-28 10:04:15
jiangxingTools
2707
Sprocket Milling Cutter
Specification: P9.525*R6.35, P12.7*R8.51, P15.875*R10.16, P19.05*R11.91, P25.4*R15.88, P31.75*R19.05, P38.1*R22.23, P44.45*R25.4, P50.8*R28.58
Standard: GB
Material: HSS
number of milling cutters for chain sprocket are groups, No.1-5 are a full set of sprocket milling cutters.
相關(guān)文章
-
Bohler S590 Microclean for Hobs
Bohler S590 Microclean for HobsMaterial composition of S590: C-1.29, Si-0.6, Mn-0.30, Cr-4.20, Mo-5,... - PA20° Module m8 Standard Involute Gear Hobber Cutter
- Rectangle Spline Hob
- Deep Counterbore Type Shaper Cutters with GB 6081
- PA20° Inserted Blade Gear Hob with Module m24
- HSS gear hobber cutter with relief ground DIN 8002 A
- PA20° Profile DIN3972 Standard Gear Cutting Hob with Module m3.75
