Module, DP and CP for Spur Gear Hobs
2021-11-26 10:16:31
jiangxingTools
2883
Module, DP and CP for Spur Gear Hobs
In most English-speaking countries, diametral pitch and circular pitch are used instead of the module.
lt is best to convert the above values into module and to proceed with the calculated module in the usual way.
The equations for the conversion into module are:
m = 25.4 / DP
m = 25.4 · CP / 3.1416
You are welcome to visit our new website for more details on gear cutting tools and gear hobs.
相關(guān)文章
-
PA20° DIN3972 Standard Gear Hob with Module m12
PA20° DIN3972 Standard Gear Hob with Module m12Material：HSS M2, M35Tooth profile is according to DIN... - PA20° DP12 Standard Gear Hobber with BPⅡ
- Gear Hobbing Machine
- Timing Pulley Hob for STS 14M
- PM-HSS G30, G50,G55 Standard Gear Hob
- Solid Gear Hob with Standard Dimensions
- HSS M2, M35, ASP30, ASP52, S390 Disk Type Gear Shaper Cutter with DIN3972 Profile
